Industrial Slurry Sludge Red Mud Dryer Machine

• Customization: Available
• After-sales Service: Installation, Commissioning, Technical Training
• Warranty: 1 Year
• Model NO.: DLNG
• Movement Way: Agitation
• Atomization: Rotary Atomization
• Flow: Cross Flow
• Heating Mode: Transmission
• Material Status: Powder
• Drying Medium: Air
• Operation Pressure: Atmospheric Pressure
• Operational Method: Continuous
• Weight (Kg): 48000
• Warranty of Core Components: 1 Year
• Capacity(T/H): 6.6
• Early Moisture(%): 55-60%
• Key Selling Points: Sustainable
• Heating Method: Gas/Oil/Electric/Steam/Biomass/Coal Heating
• Machinery Test Report: Provided
• Condition: New
• Product Name: Sludge Dryer
• Material: Steel, Stainless Steel
• Video Outgoing-Inspection: Provided
• Raw Material: Chicken Manure, Poultry Manure, Sludge
• Applicable Industries: Manufacturing Plant, Energy & Mining
• Drop Moisture Content(%): 20-25% (Adjustable)
• Evaporation Moisture Capacity(T/H): 1.9
• Transport Package: Container
• Specification: 22t-76t
• Trademark: DINGLI
• Origin: Henan, China
• Production Capacity: 20 Set/Sets Per Month

Product Description

 

Product Description

<sup>Sludge is the industrial waste generated during the production process of municipal sewage processing. Because sludge has many disadvantages such as high moisture content, high viscosity, high water holding capacity, and low calorific value, it is difficult to achieve industrial utilization. Dingli Company operated a series of technical researches on the current market situation of sludge treatment and the characteristics of sludge in various regions.

Dingli Company concentrating created a new generation of sludge rotary drum drying system, drying product moisture can be reduced to less than 25%, achieving the standard of sludge landfill and further incineration processing conditions. The technology of equipment gets absolutely mature enough, also it has a stable capacity for operation and very convenient to operate and maintain.</sup>

^{The sludge dryer can be widely used in activated sludge drying, sewage sludge drying, petrochemical sludge drying, papermaking sludge drying, printing and dyeing sludge drying, tanning sludge drying, electroplating sludge drying, municipal sludge drying, Drying of various sludges such as biological fermentation bacteria residue and various residues and other high-humidity materials.}

 

Working Principle

^{DINGLI Sludge Drum Dryer is mainly composed of hot air furnace, scattering feeder, belt conveyor, rotary drum dryer, belt outlet conveyor, draught fan, dust collector, deodorant device and electric cabinet. The working principle of the sludge drying equipment as following: About 80% of the moisture content for the wet sludge has stickness. Before the drying process, it first enters three roller belt-dewatering machines, and the sludge moisture removed to 55-60%. After entering the rotary drum dryer and drying, the wet sludge enters the tumble dryer and spitting into following six drying work areas: The first is the material feedstock zone. The wet mud enters this zone and contacts the high temperature hot air to rapidly evaporate moisture. The material is in a large lifting flight angle. Under the lifting flight drop and pick up, it will be introduced into the next working area without forming a bond. Second, the clean up area will repeatedly break and beat the material. In this area, the equipment is designed to break and beat all of the material by the cleaning device, and the wet mud is picked up and beaten by the grating copy board. After a large amount of wet mud is repeatedly crushed and beaten, it is broken and kneaded into 20-40mm pellets of coal slime to form the state of the material curtain, increasing the heat exchange area, increasing the drying rate, and the cleaning device reasonably cleans the mud adhered to the inner wall and prevent the wet mud from sticking. Thirdly, in the main drying zone, the wet mud that has been conducted in the second zone has been in a state of loose granularity. The material is picked up by the radial slanting flight on cascade uniformity, and it conducted full heat exchange with the hot air. Fourthly, It is beaten and broken Drying zone, where the mud is repeatedly beaten and broken, the mud particles are broken from 20-40mm to 10-20mm (customer requirements granularity), the moisture is further reduced; Fifth, the enhanced drying zone, the broken small granular mud is dense in the area from the copy board which is lifted to fully absorb the heat of the hot air and discharge the moisture to get the water requirement and prepare the material for discharge. The sixth is the outlet material. To prevent the discharge of dust, the rotary drum did not provided with lifting flight in this area, and the material is rolled and glided to the discharge opening. , The moisture of Sludge dropped to about 20-25% to dryer out, and finally complete the whole drying process}

Product Advantages

 

<sup>1. The full strength of the Dingli sludge drying machine has strong capacity of againsting overload, capacity of dealing with large amount of processing, less fuel consumption and low drying cost; 
2. By using the co-current drying method, the flue gas and wet materials from the same side get into the dryer, it uses high-temperature flue gas to obtain a high evaporation intensity, drying machine outlet temperature is low, high thermal efficiency; 
3. The operating parameters can be changed according to the nature of different materials, so that the material can form a stable full-cut fabric curtain in the dryer cylinder body, and the heat exchange of the quality is more complete; 
4. The new feeding and discharging device eliminates the blockage, discontinuity, non-uniformity, and material return of the tumble dryer and reduced the load on the dust removal system. 
5. The new internal structure strengthens the cleaning and heat conduction of the dispersed material, eliminates the sticking phenomenon of the inner wall of the cylinder, and has stronger adaptability to moisture and viscosity of the material; 
6. The new sludge drying equipment achieved a "zero horizontal thrust", greatly reducing the wear of the retaining wheel, the cylinder running smooth and reliable;
7.Dryer adopts "aligning roller device" made the contact between the roller and the roller always be in linear contact, thus greatly reducing wear and power loss; 
8.By using the unique bulk sludge delay drying technology to ensure the uniformity of the slime drying.</sup>

 

Product Parameters

Model(DLNG)	1412	1615	1916	2218	2518	2522	2823	3430
Capacity(t/h)	5.4	6.6	13.5	19.8	25.6	31.5	41.4	80
Evaporation moisture capacityt/h	1.2	1.9	3	4.4	5.7	7	9.2	17.7
Moisture content of raw material%	55-60%
Evaporation moisture capacityt/h	20-25%(adjustable)
Drying Temperature(°C)	850±100
Total Power(KW)	65	115	138	170	240	320	450	680
Total Weight(KG)	25000	48000	67000	85000	92000	110000	150000	265000
Plant Area(M*M)	6m*18m	6m*18m	8m*24m	10m*24m	10m*30m	10m*36m	10m*36m	10m*48m
Except above models, we also can supply special model according to your requirements.

 

 

Company Profile

<sup>Founded in 2003,we can provide you with complete energy plant solutions.Zhengzhou Dingli has four series of products with high scientific and technological content, such as Drying series, Dehydration series, Heat source series and Crushing series.

With 20 years of R&D and production experience, we have 350+ technical patents. Have a professional installation and after-sales team. There have been many successful cases in the world.

Zhengzhou Dingli Group has products including wood chips, sawdust, shavings, bagasse, coffee grounds, and other biomass drying pellet production lines. Pomace, beer yeast, cassava residue, etc. Feed Drying equipment. Manganese ore, sand, sludge, gypsum, fly ash, etc. Mineral slag drying machine. Raw coal, coal slime, lignite, and anthracite coal drying plant, Coconut fiber & cocopeat drying equipment. Poultry manure dryer and organic fertilizer production line. Continuous biomass charcoal-making machine, biochar-making plant. We also provide related wood shaving machines, pellet machines, charcoal machines, etc. Which are required by the production line.</sup>