| Customization: | Available |
|---|---|
| Model: | 300-3000t/D |
| Object: | Limestone, Coal Powder, Slag, Clay |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The mineral slag tumble dryer is mainly composed of hot air furnace, belt conveyor, rotary drum dryer, belt conveyor, induced draught fan, cyclone dust collector, bag dust collector (or wet dust collector) and operation control system. The equipment adopts the fair current (or countercurrent) drying process.
The mineral slag is conveyed to the silo by belt conveyor or bucket elevator, and transported to the feed end by the feeder of the silo. The inclination of the feeding pipeline should exceed the natural inclination of materials to facilitate sand flowing into the dryer smoothly. The rotating cylinder of the dryer is slightly inclined to the horizon. Feed the material from the higher end and the heat carrier entering from the lower end produces adverse contact between them Sometimes, they can be fed to the cylinder together.As the cylinder runs,the sand is carried to the lower side by gravity.In the process of moving forward ,the wet raw material being roasted by the heat directly or indirectly to make the raw material to dry quickly, the final products discharge out by belt conveyor or screw conveyor..There is shoveling plate installed in the dryer with the function of shovelling the materials up and down,to enlarge the contact area between airflow and materials and to enhance the efficiency and make the material running quickly.The heat carrier is hot air,the flue gas etc.After the dryer process, cyclone dust collector needs to catch the items in the airflow.You should use bag type or wet-type dust collector and afterward discharge the waste gas,if you intend to reduce the dust load of the exhaust further.
1. The dryer is made of alloy steel plate manufacturing,the wear-resisting 3-4 times of ordinary steel , the service life of the equipment is more than 10 years.
2. Material initial moisture content 15%, final moisture to ensure below 0.5-1%,which is the preferred products of the cement plant, GGBS and dry mortar production line.
3. The dryer thermal efficiency is as high as 80%, at the same time, the total power is low, 40% energy saving.
4. The fuel can be adapted to the coal, oil, gas,it can be dried under 20-40mm particles material, aggregate, powder material.
5. The dryer covers an area of about 40% lower than single drum dryer and civil investment reduced by about 50%.
6. No air leakage phenomenon, solved the sealing difficulties, modular units, installation is convenient. 7. The discharge temperature is < 50 ,which can be directly feed libraries, without cooling.
| Model | Capacity(T/D) | Initial moisture(%) | Final moisture(%) | Total Power(kw) | Covering area(m²) |
| DLMG1916 | 300 | 20-30% | <5% | 130 | 42*16 |
| DLMG2220 | 500 | 150 | 46*16 | ||
| DLMG2522 | 800 | 200 | 48*16 | ||
| DLMG2825 | 1000 | 250 | 51*16 | ||
| DLMG3026 | 1300 | 280 | 52*18 | ||
| DLMG3228 | 1500 | 330 | 55*18 | ||
| DLMG3430 | 1800 | 380 | 56*18 | ||
| DLMG3632 | 2200 | 450 | 58*18 | ||
| DLMG3835 | 2700 | 560 | 60*18 | ||
| DLMG4036 | 3000 | 660 | 60*18 |
Your device will be packed well in container and suit for long ocean shipping.
Below are Dingli Dryer Factory & Sales Team & Production Workshop Pictures:
Dingli Dryer Production Line has exported to over 80 countries with 300 foreign partners, such as Germany, Britain, United States, Italy, Israel, Chile, Thailand, Russia, Vietnam, India, Cambodia, Indonesia, Malaysia, Thailand etc.
){kind=link}